1.How to change the cutting blade of the stone cutting machine

 

　　We first prepare the special wrench for the cutting machine,align the protruding part of the wrench with the hole on the cutting and rotate the wrench to loosen the hole,then we press the button on the back of the cutting machine to unscrew the cutting piece and replace it with a new cutting piece,And then tighten the cutting blade holder.Whether we are tightening the cutting disc or the holder,we need to press and hold the button on the back of the cutting machine,and then tighten it.

 

　　2.What should I pay attention to when cutting stone?

 

　　When we cut the stone,we must first measure the size.For example,if we want to lay marble on the ground,we can first measure the size of the ground or determine the cutting size of the marble stone by pre-laying.After determining the cutting size of the stone,we still need to use tools such as chalk to make relevant marks on the stone.

 

　　Before using a cutting machine to cut stone,you must choose a good cutting blade,usually diamond cutting blades can be used for stone cutting.In addition,we also need to check whether there are missing corners on the cutting blade,whether the cutting machine has loose screws,whether the cutting machine's wires are damaged,etc.,to ensure that the cutting machine can be used normally.

 

　　When cutting stone with a cutting machine,we use the back of the stone to cut instead of cutting from the surface of the stone,because the surface of the stone is smooth and cut with the surface,which is prone to problems such as slippage of the cutting machine and cutting errors.During the cutting process,we need to add water to the stone to avoid the high temperature of the cutting machine during the cutting process,which will affect its service life and so on.