1. When working, ensure that the workpiece is fixed and the profile is positioned in line with the direction of the knife to avoid abnormal cutting. Do not apply side pressure or curve cutting. The knife should be smooth to avoid the impact of the knife edge contacting the workpiece, which may cause damage to the saw blade, or The workpiece flew out and an accident occurred.  
 
2. During work, if abnormal sounds and vibrations, rough cutting surfaces, or peculiar smells are found, the operation must be terminated immediately, and the faults must be checked in time to avoid accidents.  
 
3. When starting and stopping cutting, do not feed the tool too fast to avoid broken teeth and damage.  
 
4. If cutting aluminum alloy or other metals, special cooling lubricants should be used to prevent the saw blade from overheating, generating paste teeth, and other damage, which affects the cutting quality.  
 
5. The equipment chip trough and slag suction device ensure unobstructed, to prevent the accumulation of slag and block, which affects production and safety.  
 
6. When dry cutting, please do not continue cutting for a long time, so as not to affect the service life and cutting effect of the saw blade; wet cutting should be cut with water to prevent leakage.
 
Diamond saw blade specifications:

diamond saw blade
 
The scope of use of diamond saw blades:
 
A. It is used for cutting and pouring concrete for more than 24 hours and refurbishing old roads, with fast cutting speed, abrasion resistance and long service life.
 
B. The use of pre-alloyed powder as the carcass has achieved the purpose of reducing the ineffective drop of diamond and maximizing its use effect. It can cut 1500~3000m.
 
C. Water cutting, suitable for road cutting machines.
 
D. Using laser welding technology, the cutter head is firmly combined, and it is not easy to lose teeth.
 
F. Used to cut concrete walls and brick walls
 
G and U-shaped teeth improve the chip removal performance of the saw blade and increase the cutting speed
 
H. Strong ability to cut reinforced concrete
 
I. Shorter cutting time and lower construction cost
 
G. The diameter of saw blades available is 600~1200mm